Select Your Region: 
TOLL FREE: 800-466-1467
 
Customer Login
quality plastic fasteners for over 50 years
MENU











Micro Plastics Material Data



*** NOTICE ***

Some of the information provided may be out of date.  We are working to correct this issue.  In the meantime, in order to ensure accurate material information, please contact our customer care department and request updated material data.

 

Material: POLYPHENYLENE SULFIDE:



RYTON 40% GLASS-FIBER REINFORCED POLYPHENYLENE SULFIDE (PPS)
PHILLIPS RYTON 40% GLASS-FIBER REINFORCED POLYPHENYLENE SULFIDE R-4-02XT BLACK
Chevron/Phillips Chemical Company - Phillips Ryton R-4-02-XT Black
Polyphenylene Sulfide is a semi crystalline thermoplastic polymer that can withstand heat and chemical environments too aggressive for other thermoplastics. Used in the predominate glass filled form, Polyphenylene Sulfide has mechanical, thermal, and electrical properties that rival those of thermosets without sacrificing the processability of thermoplastics. Those properties make Polyphenylene Sulfide especially useful to designers who face challenging electrical or automotive applications. We offer this material in black only.
 
Properties
Mechanical Nominal Values (English) Test Method
Tensile Strength 26.0 Ksi ASTM D638
Elongation 1.5 % ASTM D638
Flexural Strength 37.0 Ksi ASTM D790
Flexural Modulus 2.2 Msi ASTM D790
Compressive Strength 32.0 Ksi ASTM D695
Modulus of Elasticity 2.2 Msi ASTM D638
Notched Izod Impact, 1/8 in specimen 1.4 ft-lb/in ASTM D256
Unnotched Izod Impact, 1/8 in specimen 8.0 ft-lb/in ASTM D256
 
Thermal Nominal Values (English) Test Method
Heat Deflection Temperature @ 264psi >500�F ASTM D648
UL Temperature Index 200�C/220�C
Flammability Rating V-0/5VA UL 94
     
Electrical Nominal Values (English) Test Method
Dielectric Strength 500 V/mil ASTM D149
Dielectric Constant @ 78�F (1 kHz) 4.1 ASTM D150
Dielectric Constant @ 78�F (1 MHz) 4.1 ASTM D150
Dissipation Factor @ 78�F (1 kHz) 0.002 ASTM D150
Dissipation Factor @ 78�F (1 MHz) 0.004 ASTM D150
Volume Resistivity 1 x 1015 ohm-cm ASTM D257
Arc Resistance 130 sec ASTM D495
Arc Tracking Rate 5.2 in/min UL 746A
Comparative Tracking Index 130 V UL 746A
Insulation Resistance (90�C, 95% RH, 48 hrs) 1 x 10 ohm
     
Physical Nominal Values (English) Test Method
Density 1.65 g/cc ASTM D792
Water Absorption 0.05 % ASTM D570

 
Skip Navigation LinksHOME : TECHNICAL DATA : MATERIAL LIST : MATERIAL DATA

Best Viewed in IE 6, Firefox 2, Opera 9, and Safari 1 (listed versions or later)
Recommended Screen Size of 1024 x 768 (or larger)
2007 - 2009 Micro Plastics, Inc. All Rights Reserved